MassApprox. 3 kg
ModelECM3000G9120
MaterialCase die-cast aluminium; cover polycarbonate resin with GF; bracket steel
Net weight3000 g
ProtectionIP54 or equivalent
ApplicationsTypical applications include positioning combustion air dampers, butterfly valves (V51E), and other rotary control elements in industrial burner systems, boilers, and process heating equipment.
Input signal4-20 mA DC
Key featuresWide-range power supply 85 to 264 V AC, 50/60 Hz; input signal 4 to 20 mA DC; position proportional action.; 90° angular stroke; output torque 12.5 N·m; motor timing 39 s (no load) per the official specification.; Power consumption 14 W; mass approx. 3 kg; ambient temperature -20 to +60 °C.; Splash-proof structure IP54 or equivalent; robust aluminum die-cast body.; Feedback potentiometer nominal 135 Ω with max. applied voltage 5 V DC.; Model decoding ECM3000G9120: G = 4-20 mA position proportional type, 9 = 85-264 V AC supply, 1 = 90° stroke; the auxiliary switch option digit is not documented in the official table.; Includes a standard bracket for replacing Azbil's older motors.
Motor timing39 s (no load)
Output torque12.5 N·m
RepeatabilityLess than +/-3 %
Angular stroke90°
Operation modePosition proportional (direct/reverse switchable, factory-set to direct)
Product statusDiscontinued
Ambient humidity5 to 95 %RH (no condensation)
Product categoryIndustrial control component - control motor (servo actuator, 90° angular stroke for burner control)
Operating voltage85-264 V AC, 50/60 Hz
Power consumption14 W
Auxiliary switches2 built-in auxiliary switches with an open/close override function (legacy model-number option digit 2; the equivalent option digit in the current model-number scheme is 4, 'standard model').
Product dimensionsWidth 139 mm; height 185 mm; depth 162 mm
Standard accessoryMounting bracket for replacing Azbil's older control motors - included as a standard accessory part (CP-SS-1816E, features/p.1).
Ambient temperature-20 to +60 deg C
Dielectric strength1500 V AC for 60 s (85-264 V AC type)
Storage temperature-20 to +70 deg C
Vibration resistance4.9 m/s2 (operation); 19.6 m/s2 (transport/storage, packaged)
Insulation resistance5 Mohm or more with a 500 V DC megger (power/input terminals vs. casing); 20 Mohm or more (auxiliary switch terminals vs. casing)
Feedback potentiometerNominal 135 ohm (combined resistance 1 kohm + 180 ohm), 0.5 W
Settable opening range5 to 95 % (must remain inside the end-switch range)
Auxiliary switch ratingStandard model: 250 V AC, 100 mA to 5 A resistive load; 100 mA to 3 A inductive load. Low-current model: 1 to 100 mA inductive load (including inrush current). If UL or CE compliance is required the rating is 30 Vrms or 42.4 V AC. (CP-SS-1816E, p.3.)
Forced open close inputNon-voltage contact; contact rating 15 V DC min., 100 mA min.; contact resistance 10 ohm max. (1 mA DC). Terminals S, CONT, CW and CCW must be wired with non-voltage contacts (CP-SS-1816E, p.3-p.4).
Factory switch positionsFor 90 deg angular stroke motors with built-in auxiliary switch, at factory settings: Close to Open (A, C) 9 deg +/-5 deg; Open to Close (B, D) 81 deg +/-5 deg (CP-SS-1816E, p.3).
Potentiometer max voltage5 V DC
Auxiliary switch service lifeStandard model: 50,000 cycles or more. Low-current model: 200,000 cycles or more. (CP-SS-1816E, p.3.)