Massapprox. 3 kg
ModelECM3000F213C
MaterialCase die-cast aluminium; cover polycarbonate resin with GF; bracket steel
ProtectionIP54 or equivalent
ApplicationsTypical applications include positioning burner air dampers and combustion control elements in industrial boilers, furnaces, and process heating equipment, as well as valve control duties where a 90° rotary actuator with auxiliary status switches is required.
Input signalRelay contact
Key features90° angular stroke with 12.5 N·m output torque; motor timing 39 s/33 s (50/60 Hz, relay contact, no load).; 200 V AC ±10 % power supply, 50/60 Hz; relay contact input signal; position proportional action.; Model decoding ECM3000F213C: F = 90° type, 2 = 200 V AC, 1 = standard 90° stroke, 3 = four built-in auxiliary switches, C = GB-compliant model.; Robust aluminum die-cast body; splash-proof structure IP54 or equivalent with waterproof cable gland.; Power consumption 9 VA; mass approx. 3 kg; ambient temperature -20 to +60 °C.; Auxiliary switch contact rating 250 V AC, 100 mA to 5 A (resistive load) for the standard model.; Includes a standard mounting bracket compatible with replacing Azbil's older motors.; Feedback potentiometer nominal 135 Ω; repeatability less than ±3 %.
Motor timing39 s / 33 s (50/60 Hz)
Output torque12.5 N·m
RepeatabilityLess than +/-3 %
Angular stroke90°
Operation modePosition proportional action
Product statusDiscontinued
Ambient humidity5 to 95 %RH (no condensation)
Product categoryIndustrial control component - control motor (servo actuator, 90° angular stroke for burner control)
Operating voltage200 V AC ±10 %, 50/60 Hz
Power consumption9 VA
Auxiliary switches4 inputs (option digit 3 = 4 built-in auxiliary switches, standard model)
Standard accessoryMounting bracket for replacing Azbil's older control motors - included as a standard accessory part (CP-SS-1816E, features/p.1).
Ambient temperature-20 to +60 deg C
Dielectric strength1500 V AC for 60 s (200 V AC type); 1500 V AC for 60 s auxiliary switch terminals vs. casing
Storage temperature-20 to +70 deg C
Vibration resistance4.9 m/s2 (operation); 19.6 m/s2 (transport/storage, packaged)
Insulation resistance5 Mohm or more with a 500 V DC megger (power/input terminals vs. casing); 20 Mohm or more (auxiliary switch terminals vs. casing)
Feedback potentiometerNominal 135 ohm (combined resistance 1 kohm + 180 ohm), 0.5 W
Settable opening range5 to 95 % (must remain inside the end-switch range)
Auxiliary switch rating250 V AC, 100 mA to 5 A resistive load; 100 mA to 3 A inductive load; if UL or CE compliance is required the rating is 30 Vrms or 42.4 V AC
Factory switch positionsClose-Open (A, C): 9 deg +/-5 deg; Open-Close (B, D): 81 deg +/-5 deg
Potentiometer max voltage5 V DC
Snubber leak current limit0.4 mA RMS max. at 200 V AC (0.8 mA RMS at 100 V AC)
Auxiliary switch service life50,000 cycles or more (standard model)