Skip to content
Industrial combustion components support@rifuze.com

Azbil

Azbil C6097A0110 Gas pressure switch

Azbil C6097A0110 · view 1
Model
C6097A0110

Get a quote

Azbil · C6097A0110

Detects the pressure of city gas, natural gas, LP gas or air and turns an external electrical circuit ON or OFF at a preset setpoint, providing pressure limiting and interlock functions in gas combustion and flame safeguard systems.

Technical Specifications

ModelC6097A0110
OutputSPDT contact output
StandardsEN 1854 (GAR), certificate No. 0063AR1571/1; EN 60730-2-6 (LVD); JIS C 9730-2-6
Durability100,000 cycles or more at rated contact voltage and current
Net weight260 g
ApplicationsWidely used to detect the upper or lower pressure limit of gas or air supplied to gas combustion equipment, burner blower interlock, and clogged filter detection in flame safeguard systems of industrial and commercial burners, boilers and process heating plant.
Key featuresSetting range of 0.1 to 1 kPa with a fixed nominal on-off differential gap of 40 Pa; setting accuracy 0.1 ± 0.06 kPa at the low end and 1 ± 0.15 kPa at the high end; maximum allowable pressure 20 kPa.; SPDT contact output rated 250 V AC 5 A resistive load and 250 V AC 3 A inductive load (power factor 0.6); minimum operating voltage and current 24 V DC, 50 mA.; Applicable fluids include city gas, natural gas, LP gas and air; for non-flammable gases it can also be used as a negative pressure or differential pressure switch.; kPa-unit setting dial, pressure meter port for monitoring and JIS-standard electrical conduit connection; a switch-operated indicator lamp (model 81404156) is sold separately.; Allowable ambient and fluid temperature range -15 to +60 °C; die-cast aluminum housing with NBR/nitrile rubber diaphragm; weight approximately 260 g.; Class I electric shock protection; complies with EN 1854 under the EU Gas Appliances Regulation and with EN 60730-2-6 (LVD) and JIS C 9730-2-6.
Setting range0.1 to 1 kPa
Auxiliary partSwitch-operated indicator lamp 100/200 V AC, model No. 81404156 (sold separately)
Contact rating250 V AC 5 A resistive / 3 A inductive
Pressure portsRp 1/4 high-pressure port with plug (6 mm hex wrench); Rp 1/8 low-pressure port with dust seal; monitoring pressure gauge port
Wiring terminalM3.5 screw terminal; wiring port 22 mm diameter
Differential gap40 Pa (fixed)
Product categoryIndustrial combustion component - Gas pressure switch (pressure detector for gas combustion and flame safeguard systems)
Setting accuracy0.1 ± 0.06 kPa / 1 ± 0.15 kPa
Applicable fluidsCity gas, natural gas, LP gas, air
Contact operationPressure rising: terminals 1-3 open, 2-3 closed. Pressure falling: terminals 1-3 closed, 2-3 open
Control operationON/OFF
Withstand voltage600 V AC 50/60 Hz for 1 min between terminals of the same polarity; 1500 V AC 50/60 Hz for 1 min between each terminal and the non-charged metal part; leakage current 1 mA or less under these conditions
Contact resistance100 mΩ or less initially (voltage-drop method at 6 to 8 V DC and 1 A)
Enclosure materialPBT (polybutylene terephthalate) case with a transparent polycarbonate cover
Product dimensionsWidth 69 mm; height 86 mm; depth 69 mm
Ambient temperature-15 to +60 °C
Installation positionVertical, or horizontal with the pressure-setting dial facing upward
Insulation resistance100 MΩ or more between each terminal and the non-charged metal part, with a 500 V DC megger
Series setting rangesC6097A0110 0.1 to 1 kPa; C6097A0210 0.25 to 5 kPa; C6097A0310 3 to 15 kPa; C6097A0410 10 to 50 kPa; C6097A0510 10 to 70 kPa (official variant table, CP-SS-1773E p.1)
Max allowable pressure20 kPa
Maximum allowable pressure20 kPa
Allowable fluid temperature-15 to +60 °C (without freezing or condensation)
Allowable ambient temperature-15 to +60 °C (without freezing or condensation)
Electric shock protection classClass I
Gas contacting material high pressure sideDie-cast aluminium (housing), NBR/nitrile rubber (diaphragm)

Pressure switch: purchasing checks

Review these fields for the complete ordering code. Unconfirmed fields can be included with your enquiry.

Medium
To be confirmed for the exact model
Pressure range
To be confirmed for the exact model
Switching function
To be confirmed for the exact model
Connection size
To be confirmed for the exact model
Electrical rating
To be confirmed for the exact model
Mounting
To be confirmed for the exact model

Supply information

The quotation confirms the actual items, accessories and commercial terms for your order.

Item condition
To be confirmed in your quotation
Packaging
To be confirmed in your quotation
Included accessories
To be confirmed in your quotation
Stock confirmation
To be confirmed in your quotation
Dispatch / lead time
To be confirmed in your quotation
Price conditions
To be confirmed in your quotation
Warranty provider
To be confirmed in your quotation

More components in this catalog