ModelSQM48.697B9
Supply2 x 12 V AC via bus cable
Net weight1600 g
ApplicationsIt is used in LMV5 electronic fuel/air ratio burner management on industrial boilers, process heaters and large forced-draft oil and gas burners where precise, bus-controlled positioning of air dampers, butterfly valves and fuel controllers is required.
Key featuresOfficial type-summary row S55451-D302-A100: 35 Nm nominal output torque, 35 Nm holding torque, 60 s running time for 90 degrees and 800 N radial bearing force, shaft no. 7.; Stepper motor with Hall-sensor position feedback; powered with 2 x 12 V AC over the bus cable from the LMV5 basic unit.; Addressing (fuel, air or auxiliary function) is made with the AZL5 display unit; running times, direction of rotation and limit positions are set by the basic unit.; Degree of protection IP54 with adequate cable entries; safety class III; angular adjustment max 90 degrees; reproducibility 0.2 degree with LMV5.; Die-cast aluminium lower housing with black impact-resistant plastic cover and steel spur gear train; weight approximately 1.6 kg; designed lifetime 250,000 start cycles.
Product typeactuator
Actuator driveStepper motor with spur gear train
Holding torque35 Nm
Product categoryIndustrial combustion component - high-torque electromotoric actuator for air dampers and control valves (CAN bus, LMV5)
Power consumption26...34 VA
Running time 90deg60 s
Degree of protectionIP54
Radial bearing force800 N
Nominal output torque35 Nm