ModelSQM40.247A21
Net weight2000 g
ApplicationsIt is used on forced-draft oil and gas burners and thermal process plants for load-dependent positioning of gas, oil and combustion-air dampers under 3-position or modulating (4...20 mA) control, often driven directly by burner controls.
Key featuresOfficial type data: 10 Nm rated torque, 30 s running time for 90 degrees, AC 230 V electronic version with a double potentiometer.; Counterclockwise rotation as seen from the shaft end (SQM40); operating angle adjustable between 0 and 90 degrees for this build.; Stall-proof synchronous motor; die-cast aluminium lower housing with impact-resistant plastic cover; maintenance-free gear train.; Degree of protection IP66; power consumption 10 VA; weight approximately 2 kg; external overload fuse max 6.3 AT.; Analog control inputs DC 2...10 V and 4...20 mA plus a 0...135 ohm impedance setpoint; designed lifetime 250,000 start cycles.
Order numberBPZ:SQM40.247A21
Product typeactuator
Rated torque10 Nm
Actuator driveSynchronous motor with gear train
Control signalsDC 2-10 V, 4-20 mA, 0-135 ohm
Operating angle0 to 90 degrees
Product categoryIndustrial combustion component - electromotoric actuator for air and gas dampers (SQM40, electronic version)
Operating voltageAC 230 V (-15%/+10%), 50-60 Hz
Running time 90deg30 s
Degree of protectionIP66