ModelSQM21.18502
Net weight1700 g
ApplicationsTypical applications include oil-fired forced draft burners and oil burners of medium capacity where a reversible servomotor is needed to move the air damper and oil control valve in proportion to burner output, in connection with burner controls or switching controllers equipped with changeover contacts.
Key featuresHeavy-duty SQM21 version with reinforced geartrain shafts and nitrated gearwheels, plus external position indication visible from outside the housing.; Clockwise direction of rotation when facing the drive shaft, with a nominal torque of 20 Nm and starting torque of 20 Nm.; Running time of 45 seconds for 90 degrees and 66 seconds for 130 degrees of angular travel at 50 Hz.; Operating voltage AC 220...240 V at 50 Hz or AC 220 V at 60 Hz, driven by a reversible locking-proof synchronous motor.; Equipped with 5 auxiliary switches and self-lubricating, maintenance-free sinter-bronze bearings in the geartrain.; Holding torque of 12 Nm, based on 150,000 position changes; degree of protection IP54.; Intended for use with burner controls such as LAL, LOK, LFL, LGK and LME7 series that supervise fuel-air ratio via the actuator.; Die-cast aluminium geartrain housing with dark-grey impact-proof plastic cover; weight approximately 1.7 kg.
Order numberBPZ:SQM21.18502
Product typeAir damper and control valve actuator
Actuator driveReversible synchronous motor and maintenance-free reduction gear train
Holding torque12 Nm
Nominal torque20 Nm
Starting torque20 Nm
Product categoryIndustrial combustion component - reversible electromotoric actuator for air dampers and control valves of oil burners
Operating voltageAC 220...240 V 50 Hz / AC 220 V 60 Hz
Product dimensionsWidth 120 mm; height 123 mm; depth 190 mm
Rotation directionClockwise
Running time 90 deg45 s
Degree of protectionIP54
Running time 130 deg66 s
Running time at 50 Hz45 s per 90°, 66 s per 130°