Skip to content
Industrial combustion components support@rifuze.com

Siemens

Siemens SKP55.001E2 electrohydraulic actuator

Siemens SKP55.001E2 · view 1
Manufacturer
Siemens
Manufacturer part number (MPN)
BPZ:SKP55.001E2
Model
SKP55.001E2
Order number
BPZ:SKP55.001E2

Technical Specifications

ModelSKP55.001E2
End switchYes
Net weight1900 g
ApplicationsTypical applications are gas trains of forced-draft gas burners, industrial boilers and combustion plants with heat recovery, adjustable air/fuel mixing at the burner head, or negative-pressure conditions on the gas or air side where a constant air/gas ratio must be maintained as load changes.
Closing time< 1 s
Key featuresThis exact E2 build is the European version for AC 230 V (-15%/+10%), 50/60 Hz, and its type code 001 denotes a factory-set end switch that signals the fully closed position.; The open/closed safety shut-off function conforms to EN 161 when combined with Siemens valves; suitable for gases of gas families I to III and for air.; Differential-pressure governor keeps the gas/air pressure ratio constant at 1:1 over the whole air range, removing the need for an upstream constant-pressure regulator.; Power consumption at most 10 VA; typical opening speed about 2 mm/s; closing time below 1 second at shutdown; end-switch switching load 4 A.; Degree of protection IP54 as delivered (IP65 with the AGA66 gasket kit); SKP55 weight approximately 1.9 kg; ambient temperature -15 to +60 degrees Celsius.
Order numberBPZ:SKP55.001E2
Product typeelectrohydraulic actuator
Gas air ratio1:1 differential pressure
Governor typeDifferential pressure governor
Opening speedapprox 2 mm/s
Control functionSingle-stage opening and closing
Product categoryIndustrial combustion component - electro-hydraulic actuator for gas valves with differential-pressure air/gas ratio control and safety shut-off
Operating voltageAC 230 V (-15%/+10%), 50/60 Hz
Power consumptionmax 10 VA
Product dimensionsWidth 106 mm; height 242 mm; depth 169 mm
Ambient temperature-15 to +60 C
Degree of protectionIP54 (IP65 with AGA66 kit)

Get a quote

Siemens · SKP55.001E2

The SKP55.001E2 is an electro-hydraulic actuator that mounts on Siemens VG-series modular gas valve bodies (for example VGD20, VGD40 and VGG10) to form a safety shut-off valve with air/gas ratio control. It opens slowly and closes in under one second when power is removed, delivering fail-safe gas isolation while its differential-pressure governor modulates gas pressure in a fixed 1:1 ratio to combustion-air differential pressure.

Gas valve actuator: purchasing checks

Review these fields for the complete ordering code. Unconfirmed fields can be included with your enquiry.

Compatible valve body
To be confirmed for the exact model
Control function
Single-stage opening and closing
Operating voltage
AC 230 V (-15%/+10%), 50/60 Hz
Max operating pressure
To be confirmed for the exact model
Governor range
To be confirmed for the exact model
End switch
Yes
Connector / accessories
To be confirmed for the exact model

Supply information

The quotation confirms the actual items, accessories and commercial terms for your order.

Item condition
To be confirmed in your quotation
Packaging
To be confirmed in your quotation
Included accessories
To be confirmed in your quotation
Stock confirmation
To be confirmed in your quotation
Dispatch / lead time
To be confirmed in your quotation
Price conditions
To be confirmed in your quotation
Warranty provider
To be confirmed in your quotation

Accessories to check

More components in this catalog