Kromschröder
The UVS detects ultraviolet radiation emitted by a gas flame and supplies a flame signal to a compatible burner control unit. The sensor is used with the appropriate Kromschroder flame amplifier or burner control, which evaluates the signal and performs the control response. It is intended for intermittent burner operation. The burner can use direct ignition or a pilot and main burner arrangement.
Technical Specifications
ModelUVS10D4G1
ApplicationsFlame monitoring on industrial furnaces, gas-fired boilers and hot-air furnaces.; Supervision of gas burners with or without combustion fans and excess-gas flaring installations using a compatible burner control.
Key featuresThe ultraviolet tube responds to flame radiation. It does not respond to daylight, incandescent lamp light or infrared radiation from hot workpieces and glowing furnace walls.; Incident ultraviolet light causes current to flow through the sensing tube. The sensor converts this into a direct-current signal for processing by the associated flame amplifier.; The UVS 10 uses a quartz-glass heat guard to separate the tube from the hot furnace atmosphere and protect it from heat, moisture and dirt.; The ultraviolet tube is a service component with a stated design life of approximately ten thousand operating hours. It must be replaced after that operating period.
Enclosure ratingIP65
Product categoryUltraviolet flame sensor for intermittent gas burner supervision
Spectral range nm185; 280
Model configurationThe D designation specifies a quartz-glass heat guard.; The connection is a 28 mm adapter for UVS 1 replacement.; The G1 designation specifies an M20 cable gland.
Ambient temperature c-40; 80
Flame detector: purchasing checks
Review these fields for the complete ordering code. Unconfirmed fields can be included with your enquiry.
- Detection principle
- To be confirmed for the exact model
- Compatible controller / amplifier
- To be confirmed for the exact model
- Operating mode
- To be confirmed for the exact model
- Operating voltage
- To be confirmed for the exact model
- Connection / mounting
- To be confirmed for the exact model
- Self-checking
- To be confirmed for the exact model
Supply information
The quotation confirms the actual items, accessories and commercial terms for your order.
- Item condition
- To be confirmed in your quotation
- Packaging
- To be confirmed in your quotation
- Included accessories
- To be confirmed in your quotation
- Stock confirmation
- To be confirmed in your quotation
- Dispatch / lead time
- To be confirmed in your quotation
- Price conditions
- To be confirmed in your quotation
- Warranty provider
- To be confirmed in your quotation


