Skip to content
Industrial combustion components support@rifuze.com

Honeywell

Honeywell RA890F1270 Primary burner control

Honeywell RA890F1270 · view 1
Manufacturer
Honeywell
Manufacturer part number (MPN)
RA890F1270
Model
RA890F1270
Order number
RA890F1270

Get a quote

Honeywell · RA890F1270

Nonprogramming, amplifying relay that provides solid state electronic flame safeguard protection for industrial and commercial gas, oil, or combination gas-oil burners, using the rectification principle of electronic flame detection with a flame rod, rectifying photocell, or C7012A,C ultraviolet flame detector.

Technical Specifications

ModelRA890F1270
Alarm relaySPDT
ApplicationsTypical applications include flame safeguard primary control in commercial and industrial gas, oil or combination gas-oil burners with flame rod or rectification type flame detection, where automatic safety shutdown on flame failure is required.
Key featuresFlame failure response time (FFRT) of 0.8 seconds nominal; safety switch timing of 15 seconds.; Rated 120 Vac, 50/60 Hz; SPDT alarm contacts included.; Replaces the RA890E in most applications and mounts on the same Q270A1024 subbase.; Safe-start check prevents start-up if a flame-simulating failure occurs in the flame detector circuit.; Recycles if the flame signal is lost while in Run; failure to establish pilot results in a lockout.; Built-in protection against ignition crossover in flame rod systems.; Solid state circuitry eliminates vacuum tube replacement and increases resistance to vibration; no warm-up required before starting.; Dimensions approximately 5 in. high x 5 in. wide x 4 3/4 in. deep including subbase; thermoplastic mounting base with captive screws.
Order numberRA890F1270
Product typePrimary burner control
Product statusDiscontinued
Product categoryIndustrial combustion safety - flame safeguard primary control (RA890F Protectorelay, nonprogramming amplifying relay)
Supply frequency50/60 Hz
Operating voltage120 Vac, 50/60 Hz
Safety switch timing15 seconds
Flame failure response time0.8 sec

Burner control: purchasing checks

Review these fields for the complete ordering code. Unconfirmed fields can be included with your enquiry.

Operating voltage
120 Vac, 50/60 Hz
Operating sequence
To be confirmed for the exact model
Flame supervision
To be confirmed for the exact model
Operating mode
To be confirmed for the exact model
Wiring / base
To be confirmed for the exact model
Program / configuration
To be confirmed for the exact model

Supply information

The quotation confirms the actual items, accessories and commercial terms for your order.

Item condition
To be confirmed in your quotation
Packaging
To be confirmed in your quotation
Included accessories
To be confirmed in your quotation
Stock confirmation
To be confirmed in your quotation
Dispatch / lead time
To be confirmed in your quotation
Price conditions
To be confirmed in your quotation
Warranty provider
To be confirmed in your quotation

More components in this catalog